Canon SD430 Wireless Setup Guide - Page 17

17 Connecting Connect to the computer using the camera controls. You will not require an interface cable because you are connecting wirelessly. Connect after you have registered the target device (computer) according to the procedures in Registering the Target Device with the Camera (p. 9). • The wireless networking function can be operated up to approximately 30 meters away with a direct line of sight to the target device. However, this distance will depend upon the operating conditions. • You cannot have more than one camera connected at a time. •You cannot connect to multiple target devices at once. If you are already connected to one device and attempt to connect another, the current connection will close and the camera will begin to connect to the new target device. • Always use the camera to disconnect from a wireless connection (p. 19). 1 Turn on the camera and set it to the playback Power Button or shooting modes. Playback Mode After connecting, you can download camera images to the computer and print them on a printer. Shooting Modes After connecting, you can transmit a recorded image immediately to the computer. Playback Mode or Shooting Modes See Actions Possible with the Camera Connected to a Computer (p. 21) for details. • The movie mode cannot be used over a wireless connection. • You can switch between the playback and shooting modes during a wireless connection. 2 Press the button. A menu for selecting the target device will appear on the LCD monitor. The button will light blue. Button FUNC./SET Button MENU Button Alternatively, you can display the menu for selecting the target device by pressing the MENU button, selecting the [ (Wireless)] menu followed by the [Connect/Disconnect] option, and pressing the FUNC./SET button.