Canon REALiS WUX4000 Pro AV Multimedia Projector WUX5000 / WUX4000 User's Manu - Page 98
Setting Various Functions, Selecting the Power Management Mode, Skip the POWER Button Operation
View all Canon REALiS WUX4000 Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Setting Various Functions Selecting the Power Management Mode [Power management mode] HDMI Digital PC Component Analog PC You can turn off the lamp or projector automatically in order to save power when the projector is not in use. System settings Power management mode Skip the POWER Button Operation [Direct power on] HDMI Digital PC Component Analog PC You can turn on the projector by connecting the power cable without pressing the POWER button. System settings Direct power on Off Standby Exit Disables the power management mode. If no input signal is received for 30 seconds, the projector enters the standby mode, turning off the lamp five minutes after start of countdown. If it receives an input signal or is operated during this period of 30 seconds, it resumes projection. If no input signal is received for 30 seconds, it displays the countdown and turns off the projector after 5 minutes. Press the OK button to accept your setting and then press the MENU button. • [Off] is the factory default. • During standby mode, the [POWER ON] indicator and [STAND BY] indicator flash alternately. • You cannot enable the [Direct power on] function (see the next item), if you select [Off]. Off You need to press the POWER button to turn on the projector. On You can turn on the projector by connecting the power cable only. Press the OK button to accept your setting and then press the MENU button. • [Off] is the factory default. • Before setting the direct power-on to [On], be sure to set the [Power management mode] to [Standby] or [Exit]. • After turning off the projector, wait at least 5 minutes before turning it on again. It may shorten the lamp life if you turn on the projector immediately after turning it off. 98