Canon REALiS SX6000 D Pro AV User Manual - Page 117
Memory Color Correction, 6-axis Color Adjust (Detailed Color Adjustment
View all Canon REALiS SX6000 D Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Memory Color Correction [Mem. color correct] HDMI Digital PC Component Analog PC This function produces beautiful skin tones, blues, and other colors. MENU > [Image adjustment] > [Advanced adjustment] > [Mem. color correct] Selecting an Image Quality 6-axis Color Adjust (Detailed Color Adjustment) [6-axis color adjust] HDMI Component Digital PC Analog PC You can make fine adjustments to the image colors with RGB (red, green, blue) and CMY (cyan, magenta, yellow). MENU > [Image adjustment] > [Advanced adjustment] > [6-axis color adjust] User's Manual Setting Functions from Menus Off Disables the memory color correction function. L M H Specifies the intensity of the memory color correction in three steps. Press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). Off Adjust Disables 6-axis color adjustment. If you select [Adjust], the previous setting of 6-axis color adjustment becomes active again. Enables 6-axis color adjustment. • The factory default settings are as follows. - For HDMI (when [HDMI In] (P127) is set to [Computer]), Digital PC and Analog PC, when any image mode is used except [VividPhoto], the default setting is [Off]. When [VividPhoto] is used, the default setting is [M]. - For HDMI (when [HDMI In] (P127) is set to [Auto]) and Component, the default setting is [L], regardless of the image mode. • The adjustment you have made is stored as adjusted values for the input signals and image mode of the current projection. Reset Use the [ ] / [ ] buttons to select [ Hue], [ ness], then Saturation], or adjust them with [t*heBr[igh] t/- [ ] buttons. When color adjustments are com- pleted, press the OK button. Returns all adjustment values to zero. When you have completed the adjustment, press the OK button to accept your setting and then press the MENU button or EXIT button (WX6000 / SX6000). • [Off] is the factory default. • The adjustments you have made are stored as adjusted values for the input signals and image mode of the current projection. 117