Canon REALiS LCOS WUX500 WUX500 WUX450ST Users Manual - Page 78
PC-free multi projection, Mode setting, Layout pattern setting, Destination projector setting
View all Canon REALiS LCOS WUX500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Menu Description PC-free multi projection > [Input settings] > [PC-free multi projection] Specify settings when projecting images on a USB flash drive to multiple networked projectors. For instructions, see "Using PC-Free Multi Projection" (P154). Mode setting Specify the mode for PC-free multi projection: Primary*1 or Secondary*2 mode. *1 Connect a USB flash drive and stream images for projection to Secondary projectors. *2 Project images streamed from the Primary projector. Option Off Primary Secondary Function Disable PC-free multi projection. Projection in Primary mode. Projection in Secondary mode. Before specifying the mode, confirm that you are using a wired network connection and that [Network (wired/wireless)] is set to [On/Off] or [On/On (Pj AP)] (P119). Layout pattern setting Specify the total number of projectors and the layout pattern (P155). Option Function Total number Specify the total number of projectors, including all Primary and Secondary projectors. 2 - 9 projectors can be specified. Layout pattern Select a layout pattern. Images from the Primary projector are streamed to the upper left in the layout pattern. Destination projector setting Specify IP addresses of projectors set to Secondary mode. Option Function IP address Enter the IP address of destination projectors. The projector in Primary mode is identified as [1]. The wired IP address specified in [Network settings] is displayed. Confirm Stream projection to the Secondary projector with the corresponding number (2 - 9), as specified in the IP address field. Enter Confirm the IP address of destination projectors. 78