Canon REALiS LCOS SX60 User Manual - Page 69
Projecting a Video Image from an AV Equipment, Select [DIGITAL VIDEO] as the input signal.
![]() |
View all Canon REALiS LCOS SX60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Projecting a Video Image from an AV Equipment You can project a video image with the steps similar to those for projecting an image from a computer. This section provides information specific to the projection from an AV equipment. For more detailed information for each step, refer to the corresponding page. 1 Turn on the projector. P40* z Connect the power cord and turn on the projector. P40 z Adjust the height of the projecting image. P43 z Select a display language for the first time. P41 z Adjust the focus by performing the auto setup or the focus adjustment if you can- not read the message due to out of focus. P46, 51 2 Prepare the AV equipment. z Turn on the AV equipment and start playing the video image. PROJECTING AN IMAGE FROM AV EQUIPMENT For digital content video image: 3 Press the button to switch the input signal. P70 z Select [DIGITAL VIDEO] as the input signal. 4 Press the button twice. P70 z Adjust the input signal, focusing, keystone distortion, and so on automatically using the auto setup function. 5 Press the button. z Select an appropriate image mode depending on the projecting image. P55* z Select an appropriate screen mode from the [Aspect] menu. P73, 90, 91 Stopping projection... Turn off the projector. P60* z Turn off the projector and remove the power cord from the AC outlet. * Those steps are same as those for projecting the computer screen. 69
![](/manual_guide/products/canon-sx7-user-manual-455e445/69.png)