Canon PIXMA MG5700/MG5722 MG5700 series User Manual - Page 717
Error Message Appears on PictBridge Wireless LAN Compliant, Device
View all Canon PIXMA MG5700/MG5722 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 717 highlights
Error Message Appears on PictBridge (Wireless LAN) Compliant Device The following errors may occur when you print directly from a PictBridge (Wireless LAN) compliant device. Follow the instructions below to resolve them. Note • This section describes errors that appear on Canon-brand PictBridge (Wireless LAN) compliant devices. The error messages and operations may vary depending on the device you are using. For errors on other brands of PictBridge (Wireless LAN) compliant devices, check the support code (error number) on the LCD and take the appropriate action to clear the error. List of Support Code for Error • For the errors indicated on the PictBridge (Wireless LAN) compliant device and their solution, also refer to the instruction manual of the device. For other device problems, contact the manufacturer. Error Message on PictBridge (Wireless LAN) Compliant Device What to Do "Printer in use" If the machine is printing from the computer or warming up, wait until it finishes. When it is ready, the machine starts automatically. If the machine is not printing from a computer or warming up, check the support code on the LCD and take the appropriate action to resolve the error. List of Support Code for Error "No paper" Load paper and select Continue* in the display of your PictBridge (Wireless LAN) compliant device. * Alternatively, load paper and press the OK button on the machine to resume printing. "Paper Error" If the paper output tray is closed, open it. The machine resumes printing. If the paper output tray is not closed, check the support code on the LCD and take the appropriate action to resolve the error. List of Support Code for Error "Paper jam" Select Stop in the display of your PictBridge (Wireless LAN) compliant device to stop printing. Remove the jammed paper, load new paper, press the OK button on the machine, and try printing again. "Printer cover open" Close the operation panel on the machine. "Waste tank full"/"Ink Ink absorber is nearly full. absorber full" Check the support code on the LCD and take the appropriate action to resolve the error. List of Support Code for Error 717