Canon LV-WX300ST User Manual - Page 32
Switching input signal, Auto Search, INPUT, IMAGE
View all Canon LV-WX300ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Switching input signal The projector can be connected to multiple devices at the same time. However, it can only display one full screen at a time. Be sure the Auto Search function in the INPUT menu is On (which is the default of this projector) if you want the projector to automatically search for the signals. You can also manually cycle through the available input signals. 1. Press INPUT on the projector or remote control. A source selection bar is displayed. 2. Press / until your desired signal is selected and press OK/ IMAGE. Once detected, the selected source information will be displayed on the screen for seconds. If there is multiple equipment connected to the projector, repeat steps 1-2 to search for another signal. • The brightness level of the projected image will change accordingly when you switch between different input signals. Data (graphic) "PC" presentations using mostly static images are generally brighter than "Video" using mostly moving images (movies). • The input signal type effects the options available for the Image Mode. See "Selecting a image mode" on page 37 for details. • The native display resolution of this projector is in a 4:3 (LVX300ST)/16:10 (LV-WX300ST) aspect ratio. For best display picture results, you should select and use an input signal which outputs at this resolution. Any other resolutions will be scaled by the projector depending upon the 'aspect ratio' setting, which may cause some image distortion or loss of picture clarity. See "Selecting the aspect ratio" on page 35 for details. 32