Canon LV-8320 User's Manual Network Set-up and Operation for LV-8320 - Page 40

Chapter 4 Controlling the Projector Setting 1 Item Description Language Sets the language display of projector's on-screen display menu. Auto setup Executes the Auto input, Auto PC, and Auto keystone functions below according to the each setting after clicking Start button. Auto input.........Sets the auto-input signal detection mode. (ON1, ON2, OFF) Auto PC Sets the auto PC adjustment mode. (ON, OFF) Auto keystone.....Sets Auto Keystone mode. (Auto, Manual, OFF) Background.........Sets the screen background when no signal input. (Blue, User, Black) Display Switches on or off the on-screen menu display on the screen. (OFF, Countdown off, ON) Countdown off........Displays image during the starting up. Logo Sets on or off the logo display on the screen during the startup. (OFF, Default, User) Setting 2 Item Description Terminal Sets the COMPUTER IN 2/MONITOR OUT terminal. (COMPUTER2, Monitor out) Picture in picture Select the picture in picture mode.(P in P, P by P, OFF) Power management mode Sets into the selected power management mode (Standby, Exit, OFF) if the input signal is interrupted and no control key is pressed for the specified period of time. *The specified time can be set 1 to 30 min. Direct power on Sets the power-on mode when the AC cord is connected to the outlet. (ON, OFF) Lamp mode.........Selects lamp control mode. (Auto, Normal, Eco1, Eco2) Lamp life control...Selects lamp life control mode (Mode1, Mode2) when the total use time exceeds the recommended total hours of use. Key lock Sets the prohibition of controls either Projector or Remote control. (OFF, Projector, Remote control) Fan control Sets the fan control speed. OFF Normal mode ON1 Highland mode 1 ON2 Highland mode 2 40