Canon LV-7392A Specifications - Page 37
CF_INPUTSEARCH Command, 10.4 CF_AUTOSETUPPCADJ Command, 10.5 CF_AUTOSETUPKEYSTONE Command, 10.6 - manual
View all Canon LV-7392A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
LV-7292A/LV-7297A/LV-7392A/LV-7393A/LV-7398A/LV-8227A/LV-7292M/LV-7297M/LV-8227M Expand Serial Command Functional Specifications 8.10.3 CF_INPUTSEARCH Command Command "CF_INPUTSEARCH_%1"[CR] "OFF Set Input search operation to OFF %1 "ON1 Set Input search operation to On1 "ON2 Set Input search operation to On2 Details Set Input search operation mode. The status set by this command is stored in EEPROM and its setting is effective after ALL is OFF This command is available in normal Power ON status. Note) It is unable to set Keystone, PC ADJ. and Input search to OFF at once. e.g. If projector receives Input search OFF command while Auto PC ADJ. and Keystone are OFF, it returns error code "101".. Acceptable "000"[CR] Response Unacceptable "Error Code"[CR] 8.10.4 CF_AUTOSETUPPCADJ Command Command "CF_AUTOSETUPPCADJ_%1"[CR] %1 "ON Set Auto PC ADJ. function to ON "OFF Set Auto PC ADJ. function to OFF Details Response Set/Cancel Auto PC adj. function This command is available in normal Power ON status. Note) It is unable to set Keystone, PC ADJ. and Input search to OFF at once. e.g. If projector receives Auto PC ADJ. OFF command while Keystone and Input search are OFF, it returns error code "101". Acceptable "000"[CR] Unacceptable "Error Code"[CR] 8.10.5 CF_AUTOSETUPKEYSTONE Command Command "CF_AUTOSETUPKEYSTONE_%1"[CR] "AUTO Set Auto Keystone function to Auto %1 "MANUAL Set Auto Keystone function to Manual "OFF Set Auto Keystone function to OFF Details Set Keystone function of Auto setup This command is available in normal Power ON status. Note) It is unable to set Keystone, PC ADJ. and Input search to OFF at once. e.g. If projector receives Keystone OFF command while Auto PC ADJ. and Input search are OFF, it returns error code "101".. Response Acceptable "000"[CR] Unacceptable "Error Code"[CR] 8.10.6 CF_AUTOSETUP Command Command "CF_AUTOSETUP_%1"[CR] %1 "START Execute Auto Setup Details Execute Auto Setup Note) CF commands does not execute while Auto setup is in process. If the command is sent during this, projector returns error code "302" Response Acceptable "000"[CR] Unacceptable "Error Code"[CR] -31-