Canon LV-7390 LV-7290 User's Manual - Page 62
Fan control, Lamp counter, Noise reduction, Progressive, Video delay control, Lamp counter reset
View all Canon LV-7390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Setting Fan This function provides the following options in the cooling fans' operation when the projector is turned off (p.23). L 1...... Normal operation L 2...... Slower, lower-sound and longish-time than the normal operation (L 1). Fan control Choose the running speed of cooling fans from the following options according to the ground elevation under which you use the projector. Off Normal speed. Set this function to Off when using the projector in nonhigh altitude environment. On 1 Faster than Off mode. Select this mode when using the projector in high altitudes (about 1,000 meters to 2,000 meters above the sea level) where the fans have less cooling effect. On 2 Faster than On 1 mode. Select this mode when using the projector in higher altitudes (about 2,000 meters to 3,000 meters above the sea level) where the fans have lesser cooling effect. Note: The fan noise becomes louder in On 1 and On 2. Video delay control When you want to make a digital processing of a projected image faster, set this function. Use the Point ▲▼ buttons, select an item of Off or On. Note: Noise reduction and Progressive can not be selected when Video delay control function is set to On. Lamp counter Be sure to reset the Lamp replacement counter after the lamp is replaced. (p.68) Press the Point ▲▼ buttons to choose the Lamp counter function and then press the Point ► or the OK button to access the submenu items. Lamp counter This item shows the total accumulated time of the lamp usage. Lamp counter reset.......Press the OK button to choose Lamp counter reset. Select Yes in the confirmation box if you want to reset the lamp counter, and then choose Yes in the second confirmation box to reset lamp counter. 62 Lamp counter reset