Canon Color imageCLASS MF743Cdw imageCLASS MF746Cdw/MF745Cdw/MF743Cdw/MF741Cdw - Page 43
Testing the Network Connection, Restarting the MachineP. 122
View all Canon Color imageCLASS MF743Cdw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Setting Up If you do not want to use DHCP/BOOTP/RARP to assign an IP address ● Select . If you select when these services are unavailable, the machine will waste time and communications resources searching the network for these services. 4 Check that is set to . ● If is selected, change the setting to . 5 Select . ● IP addresses assigned via DHCP override the address obtained via Auto IP. Manually entering an IP address 1 Select , and select in . 2 Select . 3 Enter , , and , and select . 5 Select . 6 Restart the machine. Restarting the Machine(P. 122) Checking whether the settings are correct ● Make sure that the Remote UI screen can be displayed with your computer ( Starting Remote UI(P. 428) ). If a computer is not available, you can check the connection by using the operation panel ( Testing the Network Connection(P. 35) ). When you have changed the IP address after installing the printer driver ● When the MFNP port is used, the connection is maintained as long as the machine and the computer belong to the same subnet; therefore, you do not need to add a new port. When the standard TCP/IP port is used, you need to add a new port. Configuring Printer Ports(P. 46) *If you do not know which port is used, see Checking the Printer Port(P. 695) . Testing the Network Connection 1 Select in the Home screen. Home Screen(P. 126) 2 Select . ● If the login screen appears, enter the correct ID and PIN. Logging in to the Machine(P. 137) 35