Canon 4460B016 EOS 60D Instruction Manual - Page 284

Troubleshooting Guide The access lamp still blinks even when the power switch is set to . If the power is turned off while an image is being recorded to the card, the access lamp will still continue to light/blink for a few seconds. When the image recording is completed, the power will turn off automatically. The battery becomes exhausted quickly. Use a fully-charged battery pack (p.24). The battery performance might have degraded. See the [7 Battery info.] menu option to check the battery's performance level (p.268). If the battery performance is poor, replace the battery pack with a new one. If you keep displaying the Quick Control screen (p.44) or do Live View shooting or movie shooting (p.151, 171) for a prolonged period, the number of possible shots will decrease. The camera turns off by itself. Auto power off is in effect. If you do not want auto power off to take effect, set [5 Auto power off] to [Off]. Shooting-Related Problems No images can be shot nor recorded. The card is not properly inserted (p.32). If the card is full, replace the card or delete unnecessary images to make room (p.32, 215). If you try to focus in the One-Shot AF mode while the focus confirmation light in the viewfinder blinks, a picture cannot be taken. Press the shutter button halfway again to focus, or focus manually (p.40, 80). Slide the card's write-protect switch to the Write/Erase setting (p.32). 284