Brother International NC2200W Network User Guide - Page 12

NC-2200w Wireless Setting, Setting up NC-2200 Wireless Setting, General, TCP/IP functions - setup

Get Brother International NC2200W PDF manuals and user guides View all Brother International NC2200W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

2 NC-2200w Wireless Setting 2 Setting up NC-2200 Wireless Setting General To connect the NC-2200w to your wireless network, follow the steps in the Quick Setup Guide. ■ If you have already used the NC-2200w on another network, re initialize the NC-2200w to its factory default settings. ■ The NC-2200w cannot be used with a USB HUB. ■ Only use the supplied AC adapter. ■ Only connect Brother Printer/MFC/DCP to the NC-2200w USB port. ■ Do not disconnect the USB cable while setting up, printing or scanning. TCP/IP functions After completed the wireless setup for NC-2200w, following TCP/IP functionalities are available. You must have a valid IP address programmed into the NC-2200w and your computer to use TCP/IP functionalities except for the address setting protocols such as DHCP/BOOTP/RARP and APIPA. DHCP/BOOTP/RARP By using the DHCP/BOOTP/RARP protocols, the IP address can be automatically configured. To use the DHCP/BOOTP/RARP functions, please contact your network administrator. NC-2200W WIRELESS SETTING 2 - 1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
NC-2200W WIRELESS SETTING 2 - 1
2
2
NC-2200w Wireless Setting
Setting up NC-2200 Wireless Setting
General
To connect the NC-2200w to your wireless network, follow the steps
in the Quick Setup Guide.
TCP/IP functions
After completed the wireless setup for NC-2200w, following TCP/IP
functionalities are available. You must have a valid IP address
programmed into the NC-2200w and your computer to use TCP/IP
functionalities except for the address setting protocols such as
DHCP/BOOTP/RARP and APIPA.
DHCP/BOOTP/RARP
By using the DHCP/BOOTP/RARP protocols, the IP address can be
automatically configured.
■
If you have already used the NC-2200w on another network, re
initialize the NC-2200w to its factory default settings.
■
The NC-2200w cannot be used with a USB HUB.
■
Only use the supplied AC adapter.
■
Only connect Brother Printer/MFC/DCP to the NC-2200w USB
port.
■
Do not disconnect the USB cable while setting up, printing or
scanning
.
To use the DHCP/BOOTP/RARP functions, please contact
your network administrator.