Brother International BAS-416A Knife Adjustments - English - Page 1
Brother International BAS-416A Manual
View all Brother International BAS-416A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Knife Adjustments - All Machines For Technical Assistance Please Call Toll Free 1-877-4BROTHER The first thing you want to check before you go through any adjustments is to see if the knives are really out of position. You will need to remove the needle plate to look. They should look like the photo below with the moving knife protruding out from the fixed knife about 1mm. Moving Knife Fixed Knife 1mm If you find that this is not the case with your machine than you will need to adjust the knives. First you will want to check and adjust, if necessary, the fixed knife. The fixed knife should be pushed all the to the back of the machine so that the screw that attaches it to the machine is against the front of the slot in the fixed knife and the right hand side of the fixed knife is against the positioning pin as illustrated by the picture below. If it is not then loosen the attaching screw and make the necessary adjustments. Attaching Screw Slot Positioning Pin 1