Brother International 3234DT Users Guide - Page 27
If threads break during sewing, To sew fine materials
![]() |
View all Brother International 3234DT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
English If threads break during sewing Remove the material and re-thread in the correct order, Lower looper, Upper looper, left needle and then the right needle (to re-thread, see CHAPTER 3 "Threading"). Replace the material under the presser foot and sew 3-5 cm (1-1/8 to 2 inches) over the previous stitches. To use the stitch finger W When sewing stretch fabrics, using the included stitch finger W prevents the fabric from stretching without adjusting the thread tension. CAUTION Do not leave straight pins in the fabric when sewing as they will damage the needles and knives. To sew fine materials 1. Adjust the presser foot pressure to prevent the material from puckering and to allow sewing of curves. (See CHAPTER 1 "Adjusting the presser foot pressure".) 2. Loosen the thread tension, but remember that if the tension is too loose, the thread may break and stitches may be skipped. Stitch finger "W" mark Stitch finger W 23
![](/manual_guide/products/brother-international-ps5234-users-guide-f8e7d4e/27.png)