Bosch WTG86402UC Instructions for Use - Page 13
Sink/Basin or Floor drain
View all Bosch WTG86402UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Examples of connections: ▯ Plumbing box or Standpipe connection: For most plumbing box installations (with adjacent ' washer) the plastic elbow supplied with the dryer will not be used and must be removed from the dryer drain hose. 1. Fasten the dryer drain hose to the washer drain/elbow as shown in picture "A". Secure with plastic ties supplied. 9 CAUTION Do not over tighten plastic ties pinching or causing a restriction in the drain hose. ( PD[LQ FP $ 2. Place drain hose assembly into standpipe as shown in picture "B". % Maximum height of drain is 39 in. (100 cm). ▯ Sink Drain Pipe: Attach and secure drain hose as shown below in picture "F". Use a standard hose clamp which can be purchased from your local hardware store. ▯ Sink/Basin or Floor drain: If using the elbow supplied on the hose re-position elbow closer to the drain end of hose and fasten with the plastic ties as shown in picture "C". & ) NOTICES ▯ Examples shown are for reference only. Not all fittings, connectors, nuts, brackets, ties, etc. are supplied to accommodate every application. ▯ Ensure there are no kinks or crimps along the entire lenght of hose. Secure hose and/or elbow as shown below. Sink "D" or floor "E". NOTICE: Examples shown are for reference only. Not all fittings, connectors, nuts, brackets, ties, etc. are supplied to accommodate every application. ▯ If installed in an upper floor of a multi-story building, the dryer should be installed on a drained floor to prevent water damage to lower floors in the event of a leak. 13