Bosch HGI8056UC Installation Instructions 1 - Page 8
Convert Cooktop Valves for, Propane Use, LP Gas Conversion Dual Valve, some models - lowes
View all Bosch HGI8056UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Convert Cooktop Valves for Propane Use 1. Verify that all knobs are in the OFF position. 2. Remove knobs (pull straight out). 3. Insert 1/8" (or smaller) flat head screwdriver into shaft and turn bypass screw clockwise until it stops (bypass screw is inside shaft). DO NOT OVERTIGHTEN. Bypass Screw Inside Shaft LP Gas Conversion Dual Valve (some models): Some gas cooktops/rangetops have a dual burner in the center. The LP Gas conversion process varies slightly for these units due to the dual valve used with them. If your unit has a dual burner in the center please reference the instructions that follow for the proper procedure to convert that burner for LP Gas. Convert Dual Valves for Propane Use 1. Verify that the dual burner control knob is in the OFF position. 2. Remove the knob (pull straight out). 3. Locate the bypass screw (see illustration below). Single valve stems are hollow; the bypass screw is located inside the stem (A). Dual valves have a brass adjustment screw (B) on the valve housing. 4. Replace knobs. If your range is dual fuel your conversion is complete. Replace the cover plate and warming drawer and proceed to "Test the Installation" on page 7. 4. For single valves, insert 1/8" (or smaller) flat head screwdriver into shaft and turn bypass screw clockwise until it stops (bypass screw is inside shaft). DO NOT OVERTIGHTEN. For dual valves, locate the brass screw near the valve stem. Turn bypass screw clockwise until it stops. DO NOT OVERTIGHTEN. 5. Replace the knob. Adjust The Low Flame Setting 1. With at least two other burners lit, light the burner to be adjusted and turn the knob to "LOW". 2. As in the preceding procedure, remove the knob and insert a screwdriver into the valve shaft. 3. Turn the adjustment screw until the flame is appropriate for a LOW setting. 4. Replace the knob. 5. Repeat for each of the other burners. For gas range conversions, continue to "Adjust Broil Burner Orifice". For dual-fuel ranges, continue to "Test the Installation". English 5