Bissell CleanView Deluxe Vacuum with OnePass Technology 2410 User Guide - Page 13
Trµbleshꝏting
![]() |
View all Bissell CleanView Deluxe Vacuum with OnePass Technology 2410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Troubleshooting WARNING To reduce the risk of electric shock, turn power switch off and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks. Problem Vacuum cleaner won't turn on Possible causes Power cord not plugged in Blown fuse/tripped breaker Remedies Check electrical plug Check/replace fuse or reset breaker Vacuum cleaner won't pick up dirt Incorrect height adjustment Hose not attached to suction opening Crack or hole in hose Broken or worn drive belt Rotating floor brush bristles worn Rotating floor brush jammed Clog in vacuum Dirt tank full Dirt tank or upper tank not installed properly Filters are dirty Adjust powerfoot to correct height setting Grasp the hose wand and firmly push into the hose wand base Check hose and replace if needed Replace drive belt, see page 11 Replace brush Remove brush and clean debris from brush ends, see page 10 Follow instructions on page 12 for clearing clogs Empty dirt tank Position correctly and lock in place Check and clean or replace pre-motor and post-motor filters, see pages 9, 10 Tool won't pick up Crack or hole in hose Clog in vacuum Dirt tank full Dirt tank or upper tank not installed properly Filters are dirty Check hose and replace if needed Follow instructions on page 12 for clearing clogs Empty dirt tank Position correctly and lock in place Check and clean or replace pre-motor and post-motor filters see pages 9, 10 Vacuum cleaner Incorrect height adjustment difficult to push Adjust powerfoot to correct height setting Visible dirt Dirt tank full escaping from Filters missing or installed cleaner incorrectly Empty dirt tank Check pre-motor and post-motor filters for correct installation Please do not return this product to the store. Other maintenance or service not included in the manual should be performed by an authorized service representative. Thank you for selecting a BISSELL product. For any questions or concerns, BISSELL is happy to be of service. Contact us directly at 1-800-237-7691. www.bissell.com 800.237.7691 13
![](/manual_guide/products/bissell-cleanview-deluxe-vacuum-onepass-technology-2410-user-guide-261e1af/13.png)