Binatone MBP8 User Manual - Page 9

CLEANING, 6. TROUBLESHOOTING, Cleaning and care

Page 9 highlights

5. CLEANING Clean your MBP8 with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the product with thinners or other solvents and chemicals - this may cause permanent damage to the product which is not covered by the warranty. • Keep your MBP8 away from hot, humid areas or strong sunlight, and don't let it get wet. • Every effort has been made to ensure high standards of reliability for your MBP8. However, if something does go wrong, please do not try to repair it yourself contact Customer Service for assistance. 6. TROUBLESHOOTING Link light on the parent unit does not come on • Check whether the parent unit is powered on. Link light on the parent unit flashes • The parent unit and the baby unit may be out of range with each other. Reduce the distance between the units, but not closer than 1.5 metre. • The baby unit may be switched off. Press and hold the 0 key on the baby unit to switch on the baby unit. The parent unit beeps • Lost connection with the baby unit. Reduce the distance between the parent unit and the baby unit, but not closer than 1.5 metre. • The baby unit may be switched off. Press and hold the 0 key on the baby unit to switch on the baby unit. CLEANING 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15

CLEANING
9
5. CLEANING
Clean your MBP8 with a slightly damp cloth or with an
anti-static cloth. Never use cleaning agents or abrasive
solvents.
Cleaning and care
°
Do not clean any part of the product with thinners or
other solvents and chemicals - this may cause
permanent damage to the product which is not
covered by the warranty.
°
Keep your MBP8 away from hot, humid areas or
strong sunlight, and don’t let it get wet.
°
Every effort has been made to ensure high standards
of reliability for your MBP8. However, if something
does go wrong, please do not try to repair it yourself -
contact Customer Service for assistance.
6. TROUBLESHOOTING
Link light on the parent unit does not come on
°
Check whether the parent unit is powered on.
Link light on the parent unit flashes
°
The parent unit and the baby unit may be out of range
with each other. Reduce the distance between the
units, but not closer than 1.5 metre.
°
The baby unit may be switched off. Press and hold the
0
key on the baby unit to switch on the baby unit.
The parent unit beeps
°
Lost connection with the baby unit. Reduce the
distance between the parent unit and the baby unit, but
not closer than 1.5 metre.
°
The baby unit may be switched off. Press and hold the
0
key on the baby unit to switch on the baby unit.