Binatone Concept Combo 3525 User Manual - Page 23

4 USING YOUR PHONE Using a cordless handset: 4.1 Make a Call 4.1.1 Preparatory Dialling Enter the phone number and press to connect to the line and dial the number. When entering the number, if you make a mistake, press to delete digits. 4.1.2 Direct Dialling Press to connect to the line and then enter the phone number. (Note: if you enter a wrong digit you cannot correct it with the key.) 4.1.3 Call from the phonebook Press , , to access the phonebook and press to select the desired phonebook entry. Press to dial out the selected phonebook entry. Note: The alphanumeric keys provide a short-cut to find entries beginning with the corresponding letters. 4.1.4 Call from the Call List (only available with Caller Display) Press to access the Call List and press to select the desired Call List entry. Press to dial out the selected Call List entry. Note: You can also access the Call List by pressing twice. 4.1.5 Call from the redial list Press to access the redial list and press to select the desired redial number. Press to dial out the selected redial number. 4.1.6 Call timer Your handset automatically times the duration of every call. The call timer is displayed as soon as you answer a call or 15 seconds after dialling and remains on the screen for 5 seconds after the end of the call. It is shown in hours, minutes and seconds format (HH:MM:SS). 4.2 Answer a Call If the handset is not on the charging cradle: When the phone rings, press to answer a call. Note: If AUTO ANSWER is set to ON, then lifting the handset off the base or charger will answer the call automatically, and no buttons need to be pressed. 21