Bernina 807 Manual - Page 44
Rectangular
View all Bernina 807 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Applique work Sewing the corners 2. Pointed corner: Stop sewing 'h cm 3. Blunt corner: Sew until the needle (12/ ") in front of the corner. Then turn is in the middle of the angle. Then 1. Rectangular corner: Put the needle back zigzag while sewing on 0. Raise sew out from centre, replacing the on the outer edge, turn the work and presser foot and turn the material. needle in the middle after every continue sewing. The corner will now Set zigzag onto 112/ again and care- stitch, raising the presser foot and be oversewn. fully continue sewing. turning the work slightly. Curves: Using the same method as for blunt corners. Muill-coloured applique work 2. Trim away surplus applique mate- 3. When covering the contours leave The lower part: rial, cutting as closely as possible to the straight stitched edge uncovered. zigzag stitches. Where a straight This will be covered again by the next 1. Only this part of the applique ma- stitch has been used leave V) cm part. terial should be tacked on. Sew ('/o") beyond stitches. around: Where the colours overlap Top part: Complete in the usual man- use straight stitch and zigzag the ner for applique work. other contours. 43