Bernina 350PE User Guide - Page 25

Quick reverse temporary: █ press the button █ the sewing computer sews stitch pattern in reverse until button is released (max. stitch length 3mm) Application: █ programs buttonholes █ programs darning length █ for switching when in the straight stitch securing program █ manual securing (seam begin and end) continous reverse: █ press button quickly twice █ the sewing computer sews the chosen stitch in reverse █ press button once to cancel Start/Stop button █ starts and stops the sewing computer when operating it without foot control - the connected foot control is idle Speed control █ to infinitely adjust the speed control when operating the sewing computer via start/stop button Needle stop Basic setting is needle stop up (arrow points up). █ press the button █ arrow points down = sewing computer stops with needle down (needle in the fabric) █ press button again █ arrow points up = sewing computer stops with needle up Press button a bit longer = the needle will go automatically up or down. Pattern end █ press the button █ sewing computer stops at the end of a single stitch pattern or stitch combination (in Memory) Mirror image (right/left) */** █ press the button █ selected stitch pattern will be sewn in mirror image #-button █ stitch selection button (see page 24) Functions 25 clr» (clear) button █ press button = reverts to basic settings █ other selected functions are cleared Exception: █ needle stop up/down █ press «clr» button twice to clear altered basic settings of the auto-length buttonhole Letters, numbers and characters (330 only Block alphabet) █ press Alphabet button █ one of the fonts will appear on the screen █ select desired font by pressing the alphabet button █ press the right button to scroll letters and numbers forwards (A B C ...) █ press the left button to scroll letters and numbers backwards (@ Ç ?...) Alphabet contents ABCDEFGHIJKLMNOPQRSTUVWXYZ 01234567890_-.'&? Ç@ Memory 1 █ press the button 2 █ «mem» will appear on the display 2 █ the number of available memory spaces (capacity of 30) and the cursor blink █ use the left 1 and right arrow buttons 3 to 3 █ scroll patterns, letters and numbers use the right arrow button 3 to save Temporary altered stitch Memory █ any stitch length or width alterations will be saved automatically For example: █ sew an altered stitch, e.g. zig-zag █ select and sew another stitch, e.g. straight stitch █ return to zig-zag, your alterations are still active Return to basic settings █ individual stitch patterns can be reverted to basic settings manually █ all altered settings are lost when the «clr»- button is pressed or when the sewing computer is turned off Application: █ for all stitch patterns █ particularly useful for switching between different applications 033301.70.04_1007_B330_B350_B380_EN