BenQ W11000 User Manual - Page 35

As shown in the lower the new lamp., Loosen the screws that secure the inner lamp cover,

Get BenQ W11000 PDF manuals and user guides View all BenQ W11000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

4. Loosen the screws that secure the inner lamp cover, and open it. 5. Loosen the screw that secures the lamp. 6. Lift the handle so that it stands up. 7. Use the handle to slowly pull the lamp out of the projector. • Pulling it too quickly may cause the lamp to break and scatter broken glass in the projector. • Do not place the lamp in locations where water might splash on it, children can reach it, or near flammable materials. • Do not insert your hands into the projector after the lamp is removed. The sharp edges inside the projector may cause injuries. If you touch the optical components inside, it could cause color unevenness and distortion of the projected images. 8. As shown in the figure, lower the new lamp. 5 4 6 7 9. Tighten the screw that secures the lamp. 10. Ensure the handle is fully laid flat and locked in place. 11. Replace the inner lamp cover and tighten the screws. • Loose screw may cause a bad connection, which could result in malfunction. • Do not over tighten the screw. 12. Replace the lamp cover on the projector. 13. Slide it back into position. 14. Connect the power and restart the projector. 8 9 11 10 12 13 Maintenance 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
35
Maintenance
4.
Loosen the screws that secure the inner lamp cover, and
open it.
5.
Loosen the screw that secures the lamp.
6.
Lift the handle so that it stands up.
7.
Use the handle to slowly pull the lamp out of the
projector.
8.
As shown in the figure, lower the new lamp.
9.
Tighten the screw that secures the lamp.
10. Ensure the handle is fully laid flat and locked in place.
11. Replace the inner lamp cover and tighten the screws.
12. Replace the lamp cover on the projector.
13. Slide it back into position.
14. Connect the power and restart the projector.
• Pulling it too quickly may cause the lamp to break and scatter
broken glass in the projector.
• Do not place the lamp in locations where water might splash
on it, children can reach it, or near flammable materials.
• Do not insert your hands into the projector after the lamp is
removed. The sharp edges inside the projector may cause
injuries. If you touch the optical components inside, it could
cause color unevenness and distortion of the projected
images.
• Loose screw may cause a bad connection, which could
result in malfunction.
• Do not over tighten the screw.
5
6
4
7
8
9
11
10
12
13