BenQ SW271C Palette Master Element How to Use Guide - Page 2

2 Proprietary Calibration Software Palette Master Element software simplifies calibration and reliably produces accurate color results. Palette Master Element can be used to fine tune the color engine in SW series monitors and fully supports X-Rite / Datacolor colorimeters. NOTE: Illustrations for reference only. Vary by purchased model. I. Launching Palette Master Element For Windows Double-click on the icon For Mac Double-click on the icon in the Dock Palette Master Element Attention XX Check to see that the USB cable is connected to both the monitor and the computer. XX Check to see that colorimeter is connected to the monitor's USB port. XX You are recommended to use the original USB-C™ cable that came with the monitor. If a separately purchased USB-C™ cable is used, make sure the cable is certified by USB-IF and is full-featured, with power delivery and video / audio / data transfer functions. XX Converters/adapters are not recommended to connect your source device to the monitor, as the compatibility of the converters/adapters in the market cannot be guaranteed. XX Before monitor calibration, turn on both the monitor and the computer to warm up for 30 minutes. XX Disable the power management functions of the computer and the monitor. Make sure that both will not in power save mode and the screen saver will not be activated during adjustment or measurement. Launching Palette Master Element