BenQ PL550 Multi-Display Administrator Manual - Page 15
Set ID RS-232C, Ambient Light Sensor
![]() |
View all BenQ PL550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Setting up display configurations 15 Status Diagnosis Power Video Source Signal Status Volume Mute Picture Mode Aspect Ambient Light Sensor Power Operation Hours Temperature (Inside) Current power on/off status of the display. Video input source being used by the display. Current input signal strength of the display. Audio mute on/off status of the display. Current picture mode setting of the display. Current aspect ratio setting of the display. Current on/off status of the display's ambient light sensor. The diagnosis result for the display's power status. The display's total elapsed power on time. The temperature inside the display. The following information of each display will be provided on the Information tab when a display group is selected on the Monitor list panel. Item Status IP Address (Ethernet connection) Set ID (RS-232C connection) Tag Power Input Temp Description The network connection status of each display. The IP address of each display. The monitor ID of each display. The tag (name) given to each display. The power on/off status of each display. The input source current being used by each display. The temperature inside each display.
![](/manual_guide/products/benq-pl460-multidisplay-administrator-manual-fac1d4d/15.png)