BenQ PH550 PH550 User Manual - Page 8

Notes on moving the display, display against its corner. Fig. 2

Page 8 highlights

8 Important safety instructions Notes on moving the display The display has limited mechanical strength. To prevent the display from performance failure caused by line defects, front bezel bending, glass scratch/broken, light leakage, etc, it must be handled with care. • Always move the display by at least two (2) adults. • When you want to move the display, make sure the four (4) handles are held. • When you want to place the display face down: - Prepare a flat and horizontal surface that is larger than the display and spread a thick protective sheet on it. (Fig. 1) - Lay down the display gently and horizontally. • When you want to upturn the display: - Lift the display up horizontally by holding the four (4) handles. Do not lift the display against its corner. (Fig. 2) - Be careful not to scratch any parts of the display when upturning the display. (Fig. 3) - Stand the display vertically to make sure the its weight spread evenly on the surface. (Fig. 4) (Fig. 1) (Fig. 2) Support surface (Fig. 3) (Fig. 4) • Check the shock label on the outside of the product carton. The shock indicator on the label will turn red if the display/package is improperly handled.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47

Important safety instructions
8
Notes on moving the display
The display has limited mechanical strength. To prevent the display from performance
failure caused by line defects, front bezel bending, glass scratch/broken, light leakage, etc,
it must be handled with care.
• Always move the display by at least two (2) adults.
• When you want to move the display, make sure the four (4) handles are held.
• When you want to place the display face down:
-
Prepare a flat and horizontal surface that is larger than the display and spread a
thick protective sheet on it. (Fig. 1)
-
Lay down the display gently and horizontally.
• When you want to upturn the display:
-
Lift the display up horizontally by holding the four (4) handles. Do not lift the
display against its corner. (Fig. 2)
-
Be careful not to scratch any parts of the display when upturning the display. (Fig. 3)
-
Stand the display vertically to make sure the its weight spread evenly on the
surface. (Fig. 4)
• Check the shock label on the outside of the product carton. The shock indicator on the
label will turn red if the display/package is improperly handled.
Support surface
(Fig. 1)
(Fig. 2)
(Fig. 3)
(Fig. 4)