BenQ MW705 Business Projector User Manual - Page 12

11. PAGE +/PAGE - 20. QUICK INSTALL Operate your display software program (on a connected PC) which responds to Quickly selects several functions to adjust the projected image and displays the test pattern. page up/down commands (like Microsoft PowerPoint). Operating the LASER pointer 12. ASPECT Selects the display aspect ratio. The Laser Pointer is a presentation aid for professionals. It emits red colored light when 13. NETWORK SETTING you press it. No function. 14. SOURCE Displays the source selection bar. The laser beam is visible. It is necessary to press and hold LASER for continuous output. 15. QCast Switches the projector source to HDMI2/MHL. 16. AUTO Automatically determines the best picture timings for the displayed image. 17. FREEZE Freezes the projected image. 18. SMART ECO Displays the lamp mode selection bar. WARNING: Do not look into the laser light window or shine the laser light beam on yourself or others. See the warning messages on the back of the remote control prior to using it. The laser pointer is not a toy. Parents should be mindful of the dangers of laser energy and keep this remote control out of the reach of children. 19. ECO BLANK Used to hide the screen picture. Remote control effective range The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR remote control sensor(s) to function correctly. The distance between the remote control and the sensor(s) should not exceed 8 meters (~ 26 feet). Make sure that there are no obstacles between the remote control and the IR sensor(s) on the projector that might obstruct the infra-red beam. • Operating the projector from the front • Operating the projector from the top Approx. +30º Approx. +30º 12 Introduction