BenQ MW705 Business Projector User Manual

BenQ MW705 Business Projector Manual

Get BenQ MW705 Business Projector PDF manuals and user guides View all BenQ MW705 Business Projector manuals
Add to My Manuals
Save this manual to your list of manuals

BenQ MW705 Business Projector manual content summary:

  • BenQ MW705 Business Projector | User Manual - Page 1
    MX704/MW705 Digital Projector User Manual
  • BenQ MW705 Business Projector | User Manual - Page 2
    Table of contents Important safety instructions 3 Introduction 7 Projector features 7 Shipping contents 8 Projector exterior view 41 Maintenance 51 Care of the projector 51 Lamp information 52 Troubleshooting 58 Specifications 59 Projector specifications 59 Dimensions 60 Ceiling mount
  • BenQ MW705 Business Projector | User Manual - Page 3
    that you follow the instructions mentioned in this manual and marked on the product. Safety Instructions 1. Please read this manual before 5. you operate your protector or uninterruptible power supply (UPS). 3. Refer servicing to qualified service personnel. 6. Do not block the projection lens
  • BenQ MW705 Business Projector | User Manual - Page 4
    Safety Instructions (Continued) 7. The lamp becomes extremely hot 10. Do not place this you should come into contact with cause them to break on rare live parts. The only user serviceable occasions. part is the lamp which has its own removable cover. Under no circumstances should you ever
  • BenQ MW705 Business Projector | User Manual - Page 5
    Safety Instructions (Continued) 13. Do not place this projector in any of 14. the following environments. - Space that is poorly ventilated or confined. vertically. Doing so may cause the projector to fall over, causing injury or resulting in damage to the projector. Important safety instructions 5
  • BenQ MW705 Business Projector | User Manual - Page 6
    Safety Instructions (Continued) 17. Do not step on the projector or place any become wet, disconnect it from the power supply's power outlet and call BenQ to have the projector serviced. 19. This product is capable of displaying inverted images for ceiling mount installation. Use only BenQ's
  • BenQ MW705 Business Projector | User Manual - Page 7
    . • Instant Restart Selectable Instant Restart function enables you to restart the projector immediately within 90 seconds after turning it off. • 3D Function supported Various 3D formats make the 3D function more flexible. By presenting the depth of the images, you can wear BenQ 3D glasses to enjoy
  • BenQ MW705 Business Projector | User Manual - Page 8
    only supplied in some specific regions. Please consult your dealer for detailed information. Projector QDuigiictkalSPtraortjeGctuoidr e Quick start guide Power cord VGA cable User manual CD Warranty card* Remote control with batteries Optional accessories 1. Spare lamp kit 2. Ceiling mount kit
  • BenQ MW705 Business Projector | User Manual - Page 9
    Projector exterior view Front/upper side 1 2 3 4 5 6 7 8 9 10 11 Rear/lower side 12 13 14 15 16 17 18 19 20 21 22 23 24 24 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 25 21. 23 22. 23. 24. 25. External control panel (See "Controls and functions" on page 10 for
  • BenQ MW705 Business Projector | User Manual - Page 10
    port. Indicates the status of the lamp. Lights up 13. BACK or flashes when the lamp has developed a Goes back to previous OSD menu, exits problem. and saves menu settings. 8. SOURCE 14. MENU Displays the source selection bar. Turns on the On-Screen Display (OSD) 9. OK menu. Confirms the
  • BenQ MW705 Business Projector | User Manual - Page 11
    Remote control 1 2 3 4 5 6 7 8 9 10 11 12 13 (For Japan) 14 1 14 15 2 15 3 4 5 16 6 16 7 8 17 18 10 11 12 17 18 19 20 13 19 20 1. POWER 7. , , Toggles the projector between standby mode and on. 2. Source selection buttons (COMPUTER 1, VIDEO, S-VIDEO, HDMI, QCast) • :
  • BenQ MW705 Business Projector | User Manual - Page 12
    11. PAGE +/PAGE - 20. QUICK INSTALL Operate your display software program (on a connected PC) which responds to Quickly selects several functions to adjust the projected image and displays the test pattern. page up/down commands (like Microsoft PowerPoint). Operating the LASER pointer 12.
  • BenQ MW705 Business Projector | User Manual - Page 13
    • Replace only with the same or equivalent type recommended by the battery manufacturer. • Dispose of the used batteries according to the manufacturer's instructions and local environment regulations for your region. • Never throw the batteries into a fire. There may be danger of an explosion. • If
  • BenQ MW705 Business Projector | User Manual - Page 14
    Positioning your projector Choosing a location Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the
  • BenQ MW705 Business Projector | User Manual - Page 15
    Obtaining a preferred projected image size The distance from the projector lens to the screen, the zoom setting, and the video format each factors in the projected image size. Projection dimensions MX704 4:3 Screen diagonal Screen Center of lens H W Vertical offset Projection distance The
  • BenQ MW705 Business Projector | User Manual - Page 16
    If your measured projection distance is 620 cm, the closest match in the "Distance from screen (cm)" column is 626 cm. Looking across this row shows that a 150'' (about 3.8 m) screen is required. MW705 16:10 Screen diagonal Screen H Center of lens W Projection distance The screen aspect
  • BenQ MW705 Business Projector | User Manual - Page 17
    projection size and distance using the actual projector in situ before you permanently install it, so as to make allowance for this projector's optical characteristics. This will help you determine the exact mounting position so that it best suits your installation location. Positioning your
  • BenQ MW705 Business Projector | User Manual - Page 18
    Connection When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. In the connections shown below, some cables may not be included with the
  • BenQ MW705 Business Projector | User Manual - Page 19
    Many notebooks do not turn on their external video ports when connected to a projector. Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a function key labeled CRT/LCD or a function key with a monitor symbol on the notebook. Press FN and the labeled function
  • BenQ MW705 Business Projector | User Manual - Page 20
    Connecting video streaming dongle - QCast (optional accessory) This dongle allows you to perform a wireless projection from your smart device or computer. To purchase the QCast dongle, contact your local dealer. Installation 1. Loosen the screw that secures the wireless cover and open the wireless
  • BenQ MW705 Business Projector | User Manual - Page 21
    • Press QCast on the projector or remote control. • Press SOURCE and select HDMI-2/MHL from the source selection bar. 4. You can start the wireless projection now. If the wireless projection stops unexpectedly, press QCast to turn off the QCast dongle. Pressing QCast on the projector or remote
  • BenQ MW705 Business Projector | User Manual - Page 22
    90 seconds before energizing the lamp. 3. If the projector is activated for the first time, select your OSD language following the on-screen instructions. 4. If you are prompted for a password, press the arrow keys to enter a six-digit password. See "Utilizing the password function" on page 27
  • BenQ MW705 Business Projector | User Manual - Page 23
    Adjusting the projected image Adjusting the projection angle The projector is equipped with a quick-release adjuster foot and 2 rear adjuster feet. These adjusters change the image height and projection angle. To adjust the projection angle: 1. Press the quick-release button and lift the front
  • BenQ MW705 Business Projector | User Manual - Page 24
    the right side of the image. Press on the projector to correct keystoning at the left side of the image. Adjusting Corner Fit You can manually adjust four corners of the image by setting the horizontal and vertical values. 1. Do one of the following steps to display the corner fit correction
  • BenQ MW705 Business Projector | User Manual - Page 25
    3. Press / to adjust vertical values. 4. Press / to adjust horizontal values. Corner Fit Enter Back Operation 25
  • BenQ MW705 Business Projector | User Manual - Page 26
    Using the menus The projector is equipped with On-Screen Display (OSD) menus for making various adjustments and settings. The OSD screenshots below are for reference only, and may differ from the actual design. Below is the overview of the OSD menu. Main menu icon Main menu Sub-menu Highlight
  • BenQ MW705 Business Projector | User Manual - Page 27
    display as asterisks on-screen. Write your selected password down here in this manual in advance or right after the password is entered so that it is available to you should you ever forget it. Password Keep this manual in a safe place. 6. To leave the OSD menu, press BACK. If
  • BenQ MW705 Business Projector | User Manual - Page 28
    contact BenQ Customer Center. projector. 3. Seek help from the local BenQ service Recall Code: center to decode the number. You may be 255 255 display as asterisks on-screen. Write your selected password down here in this manual in advance or right after the password is entered so that it is
  • BenQ MW705 Business Projector | User Manual - Page 29
    ii. If the password is incorrect, the password error message will appear, and the message "INPUT PASSWORD" appears for your retry. You can press BACK to cancel the change or try another password. Though the password function is disabled, you need to keep the old password in hand should you ever need
  • BenQ MW705 Business Projector | User Manual - Page 30
    Magnifying and searching for details If you need to find the details on the projected picture, magnify the picture. Use the direction arrow keys for navigating the picture. 1. Press MENU and then press / until the DISPLAY menu is highlighted. 2. Press to highlight Digital Zoom and press OK. The Zoom
  • BenQ MW705 Business Projector | User Manual - Page 31
    About the aspect ratio In the pictures below, the black portions are inactive areas and the white portions are active areas. OSD menus can be displayed on those unused black areas. 1. Auto: Scales an image proportionally to fit the projector's native resolution in its horizontal or vertical width.
  • BenQ MW705 Business Projector | User Manual - Page 32
    Optimizing the image Using Wall Color In the situation where you are projecting onto a colored surface such as a painted wall which may not be white, the Wall Color feature can help correct the projected picture's colors to prevent possible color difference between the source and projected pictures.
  • BenQ MW705 Business Projector | User Manual - Page 33
    Fine-tuning the image quality in user modes According to the detected signal type and selected picture mode, some of the below functions may not be available. Based on your needs, you can make adjustments to these functions by highlighting them and pressing / on the projector or remote control.
  • BenQ MW705 Business Projector | User Manual - Page 34
    3. Press / to highlight the item you want to change and adjust the values by pressing / . • R Gain/G Gain/B Gain: Adjusts the contrast levels of Red, Green, and Blue. • R Offset/G Offset/B Offset: Adjusts the brightness levels of Red, Green, and Blue. 4. Press BACK to exit and save the settings 3D
  • BenQ MW705 Business Projector | User Manual - Page 35
    For example, if you select Red and set its value at 0, only the saturation of pure red will be affected. Saturation is the amount of that color in a video picture. Lower settings produce less saturated colors; a setting of "0" removes that color from the image entirely. If the saturation is too high
  • BenQ MW705 Business Projector | User Manual - Page 36
    the last 30 seconds of counting down/up, and a triple beep sound will be produced when the timer is up. 7. To activate the presentation timer, press and press / to highlight On and press OK. 8. A confirmation message appears. Highlight Yes and press OK on the projector or remote control to confirm.
  • BenQ MW705 Business Projector | User Manual - Page 37
    Locking control keys With the control keys on the projector locked, you can prevent your projector settings from being changed accidentally (by children, for example). When the Panel Key Lock is on, no control keys on the projector will operate except POWER. 1. Go to the SYSTEM SETUP: Basic >
  • BenQ MW705 Business Projector | User Manual - Page 38
    Adjusting the sound level To adjust the sound level, press / , or: 1. Repeat steps 1-2 above. 2. Press to highlight Volume and press / to select a desired sound level. Turning off the Power On/Off Ring Tone To turn off the ring tone: 1. Repeat steps 1-2 above. 2. Press to highlight Power On/Off
  • BenQ MW705 Business Projector | User Manual - Page 39
    Using the teaching templates The projector provides several preset patterns for various teaching purposes. To activate the pattern: 1. Open the OSD menu and go to the DISPLAY > Teaching Template and press / to select Blackboard or Whiteboard. 2. Press / to choose the pattern you need. 3. Press OK
  • BenQ MW705 Business Projector | User Manual - Page 40
    Shutting down the projector 1. Press POWER and a confirmation message will display prompting you. If you don't respond in a few seconds, the message will disappear. 2. Press POWER a second time. The POWER indicator light flashes orange, the projection lamp shuts down, and the fans will continue to
  • BenQ MW705 Business Projector | User Manual - Page 41
    Menu operation Menu system Please note that the on-screen display (OSD) menus vary according to the signal type selected and the projector model you are using. Main menu Sub-menu Options 1. DISPLAY 2. PICTURE 3. SOURCE Wall Color Off/Light Yellow/Pink/Light Green/Blue/ Blackboard Aspect Ratio
  • BenQ MW705 Business Projector | User Manual - Page 42
    Main menu Sub-menu Presentation Timer Options Timer Period Timer Display Timer Position Timer Counting Direction Sound Reminder On/Off 1~240 minutes Always/3 min/2 min/1 min/Never Top-Left/Bottom-Left/Top-Right/ Bottom-Right Count Down/Count Up On/Off Language 4. SYSTEM SETUP: Basic Projector
  • BenQ MW705 Business Projector | User Manual - Page 43
    Main menu Sub-menu Options High Altitude Mode On/Off Mute On/Off Audio Settings Volume Power On/Off Ring Tone On/Off Lamp Settings Lamp Mode Normal/Economic/SmartEco/ LampSave Reset Lamp Timer 5. SYSTEM SETUP: Security Settings Lamp Timer Change Password Change Security Settings
  • BenQ MW705 Business Projector | User Manual - Page 44
    1. DISPLAY menu Description of each menu Function Wall Color Aspect Ratio Auto Keystone 2D Keystone Corner Fit Position Phase Description Corrects the projected picture's color when the projection surface is not white. See "Using Wall Color" on page 32 for details. There are several options to
  • BenQ MW705 Business Projector | User Manual - Page 45
    The Picture Mode cannot be adjusted. 3D Sync Invert When you discover the inversion of the image depth, enable this function to correct the problem. Save 3D Settings When you have successfully displayed the 3D contents after making the appropriate adjustments, you can enable this function and choose
  • BenQ MW705 Business Projector | User Manual - Page 46
    2. PICTURE menu Function Description Picture Mode Reference Mode Brightness Contrast Color Tint Sharpness Brilliant Color Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See "Selecting a picture mode" on page 32 for details.
  • BenQ MW705 Business Projector | User Manual - Page 47
    4. SYSTEM SETUP: Basic menu Function Presentation Timer Language Projector Installation Menu Settings Operation Settings Description Reminds the presenter to finish the presentation within a certain time frame. See "Setting the presentation timer" on page 35 for details. Sets the language for the
  • BenQ MW705 Business Projector | User Manual - Page 48
    's so that you can connect the projector using a suitable RS-232 cable and update or download the projector's firmware. This function is intended for qualified service personnel. See "Using the test pattern" on page 38 for details. 5. SYSTEM SETUP: Advanced menu 48 Operation
  • BenQ MW705 Business Projector | User Manual - Page 49
    5. SYSTEM SETUP: Advanced menu Function Closed Caption Standby Settings Reset All Settings Description Closed Caption Enable Activates the function by selecting On when the selected input signal carries closed captions. • Captions: An on-screen display of the dialogue, narration, and sound effects
  • BenQ MW705 Business Projector | User Manual - Page 50
    6. INFORMATION menu Function Current System Status Description Source Shows the current signal source. Picture Mode Shows the selected mode in the PICTURE menu. Lamp Mode Shows the current lamp mode. Resolution Shows the native resolution of the input signal. 3D Format Shows the current 3D mode.
  • BenQ MW705 Business Projector | User Manual - Page 51
    detergents. These can damage the case. Storing the projector If you need to store the projector for an extended time, please follow the instructions below: • Make sure the temperature and humidity of the storage area are within the recommended range for the projector. Please refer to "Specifications
  • BenQ MW705 Business Projector | User Manual - Page 52
    Lamp information Getting to know the lamp hour When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by the built-in timer. The method of calculating the equivalent lamp hour is as follows: Lamp Usage Time = (hours used in Normal mode) + (hours used
  • BenQ MW705 Business Projector | User Manual - Page 53
    lamp now Equivalent lamp hour > XXXX Hours Order a new lamp at www.BenQ.com NOTICE Out of lamp usage time Replace lamp (Refer to user manual) Then reset lamp timer Order a new lamp at www.BenQ.com "XXXX" shown in the above messages are numbers that vary depending on different models
  • BenQ MW705 Business Projector | User Manual - Page 54
    Replacing the lamp WARNING: • To reduce the risk of electrical shock, always turn the projector off and disconnect the power cord before changing the lamp. • To reduce the risk of severe burns, allow the projector to cool for at least 45 minutes before replacing the lamp. • To reduce the risk of
  • BenQ MW705 Business Projector | User Manual - Page 55
    7. Use the handle to slowly pull the lamp out of the projector. WARNING: • Pulling it too quickly may cause the lamp to break and scatter broken glass in the projector. • Do not place the lamp in locations where water might splash on it, children can reach it, or near flammable materials. • Do not
  • BenQ MW705 Business Projector | User Manual - Page 56
    Resetting the lamp timer 15. After the startup logo, open the On-Screen Display (OSD) menu. Go to the SYSTEM SETUP: Advanced > Lamp Settings menu. Press OK. The Lamp Settings page displays. Highlight Reset Lamp Timer. A warning message displays asking if you want to reset the lamp timer. Highlight
  • BenQ MW705 Business Projector | User Manual - Page 57
    Indicators Light Status & Description Orange Green Flashing Green Orange Flashing Red Flashing Green Red Flashing Red Green Green Off Off Off Off Red Flashing Off Off Off Off Green Off Off Green Off Off Off Off Green Red Red Red Red Green Red Red Flashing Green Green Flashing Red Power
  • BenQ MW705 Business Projector | User Manual - Page 58
    Troubleshooting The projector does not turn on. Cause Remedy There is no power from the power cord. Attempting to turn the projector on is incorrect Cause Remedy You do not remember the password. Please see "Entering the password recall procedure" on page 28 for details. 58 Troubleshooting
  • BenQ MW705 Business Projector | User Manual - Page 59
    Specifications Projector specifications All specifications are subject to change without notice. Optical Resolution MX704: 1024 x 768 XGA MW705: 1280 x 800 WXGA Display system 1-CHIP DMD Lens F = 2.56 ~ 2.68, f = 22.0 ~ 24.1 mm Clear focus range MX704: 2.38-7.15 m @ Wide, 2.62-7.87 m @ Tele MW705
  • BenQ MW705 Business Projector | User Manual - Page 60
    Dimensions 331 mm (W) x 129.4 mm (H) x 250.6 mm (D) 129.4 250.6 Ceiling mount installation Ceiling Mount screw: M4 (Max L = 25 mm; Min L = 20 mm) 331 PUSH Unit: mm 100.57 127.7 77 635.92 577.7 537.9 40.49 76.5 8 199.6 116.99 156.37 330.98 Unit: mm 60 Specifications
  • BenQ MW705 Business Projector | User Manual - Page 61
    Timing chart Supported timing for PC input Resolution Mode VGA_60* 640 x 480 VGA_72 VGA_75 VGA_85 720 x 400 720 x 400_70 SVGA_60* SVGA_72 800 x 600 SVGA_75 SVGA_85 SVGA_120** (Reduce Blanking)
  • BenQ MW705 Business Projector | User Manual - Page 62
    due to EDID file and VGA graphic card limitations. It is possible that some timings cannot be chosen. Supported timing for HDMI (HDCP) input Resolution Mode VGA_60* 640 x 480 VGA_72 VGA_75 VGA_85 720 x 400 720 x 400_70 SVGA_60* SVGA_72 800 x 600 SVGA_75 SVGA_85 SVGA_120** (Reduce
  • BenQ MW705 Business Projector | User Manual - Page 63
    33.75 74.25 24 27 74.25 25 28.13 74.25 30 33.75 74.25 50 56.25 148.5 60 67.5 148.5 *Supported timing for 3D signal in Frame Sequential format. Displaying a 1080i(1125i)@60Hz or 1080i(1125i)@50Hz signal may result in slight image vibration. Specifications 63
  • BenQ MW705 Business Projector | User Manual - Page 64
    (kHz) 15.73 15.63 15.63 15.73 15.63 15.73 15.73 Vertical Frequency (Hz) 60 50 50 60 50 60 60 *Supported timing for 3D signal in Frame Sequential format. Color sub-carrier Frequency (MHz) 3.58 4.43 4.25 or 4.41 3.58 3.58 4.43 4.43 64 Specifications
  • BenQ MW705 Business Projector | User Manual - Page 65
    parts (labor included). To obtain warranty service, immediately notify the dealer from which you operate the product in accordance with BenQ's written instructions, especially the ambient humidity must be inbetween 10% mechanical, magnetic, optical, chemical, manual or otherwise, without the prior
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
MX704/MW705
Digital Projector
User Manual