BenQ HT2550 User Manual - Page 30
SYSTEM SETUP: BASIC menu, Aspect Ratio, 12V Trigger, High Altitude, Language, Background, Color
View all BenQ HT2550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Aspect Ratio There are several options to set the image's aspect ratio depending on your input signal source. • Auto: Scales an image proportionally to fit the projector's native resolution in its horizontal or vertical width. 15:9 picture • Real: Projects an image as its original resolution and resizes it to fit within the display area. For input signals with lower resolutions, the projected image will be 4:3 picture displayed in its original size. 16:9 picture • 4:3: Scales an image so that it is displayed in the center of the screen with a 4:3 aspect ratio. • 16:9: Scales an image so that it is displayed in the center of the screen with a 16:9 aspect ratio. 4:3 picture • 2.4:1: Scales an image so that it is displayed in the center of the screen with a 2.4:1 aspect ratio. 16:9 picture 16:9 picture 12V Trigger If On is selected, the projector will send electronic signal out when it is turned on. We recommend you use the High Altitude Mode when your environment is between 1500 m -3000 m above sea level, and ambient temperature is between 0°C-30°C. Operation under "High Altitude Mode" may cause a higher decibel operating noise level because of increased fan speed necessary to improve overall system cooling and performance. High Altitude Mode If you use this projector under other extreme conditions excluding the above, it may display auto shut-down symptoms, which is designed to protect your projector from over-heating. In cases like this, you should switch to High Altitude mode to solve these symptoms. However, this is not to state that this projector can operate under any and all harsh or extreme conditions. Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and ambient temperature is between 0°C and 35°C. The projector will be over cooled, if you turn the mode on under such a condition. SYSTEM SETUP: BASIC menu Language Sets the language for the On-Screen Display (OSD) menus. Background Sets the background color for the projector. Color Splash Screen Allows you to select which logo screen will be displayed during projector start-up. Auto Off Allows the projector to turn off automatically if no input signal is detected after a set period of time to prevent unnecessary waste of lamp life. 30 Menu operation