BenQ HT2050A User Manual - Page 37

Reset Current, Picture Mode, Fast Mode, Film Mode, Light Mode

Get BenQ HT2050A PDF manuals and user guides View all BenQ HT2050A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Advanced... Reset Current Picture Mode • Fast Mode Reduces frame delay. The lag between the signal input and output will be minimized to the lowest level. Select an HDMI signal at 1080p/60Hz to use this function. Aspect Ratio will be set to Auto, and Overscan Adjustment will be set to 0 during operation. • Film Mode Enhances picture quality when projecting composite image from a filmsourced DVD or Blu-ray Disc. Setting Off disables the function. • Light Mode Select the projector lamp power from the following modes. • Normal: Provides full lamp brightness. • Economic: Reduces system noise and lamp power consumption by 30%. • SmartEco: Reduces system noise and lamp power consumption by up to 70%. If the Economic or SmartEco mode is selected, the light output will be reduced and result in darker projected pictures. See Setting Light Mode for details. All of the adjustments you've made for the selected Picture Mode (including preset modes, User 1, and User 2) return to the factory preset values. 1. Press OK. The confirmation message is displayed. 2. Use / to select Reset and press OK. The picture mode returns to the factory preset settings. 3. Repeat steps 1 and 2 if you want to reset other picture modes. Menu Functions 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
37
Menu Functions
Advanced...
•
Fast Mode
Reduces frame delay. The lag between the signal input and output will be minimized to
the lowest level.
Select an HDMI signal at 1080p/60Hz to use this function. Aspect Ratio will be
set to Auto, and Overscan Adjustment will be set to 0 during operation.
•
Film Mode
Enhances picture quality when projecting composite image from a filmsourced DVD
or Blu-ray Disc. Setting
Off
disables the function.
•
Light Mode
Select the projector lamp power from the following modes.
•
Normal
: Provides full lamp brightness.
•
Economic
: Reduces system noise and lamp power consumption by 30%.
•
SmartEco
: Reduces system noise and lamp power consumption by up to 70%.
If the
Economic
or
SmartEco
mode is selected, the light output will be reduced
and result in darker projected pictures.
See
Setting Light Mode
for details.
Reset Current
Picture Mode
All of the adjustments you’ve made for the selected
Picture Mode
(including preset
modes,
User 1
, and
User 2
) return to the factory preset values.
1.
Press
OK
. The confirmation message is displayed.
2.
Use
/
to select
Reset
and press
OK
. The picture mode returns to the
factory preset settings.
3.
Repeat steps 1 and 2 if you want to reset other picture modes.