BenQ HC1200 sRGB DLP Projector User Manual - Page 58
SYSTEM SETUP: Advanced > Lamp Settings, MODE/ENTER, Lamp Settings, Reset lamp timer, Reset
![]() |
View all BenQ HC1200 sRGB DLP Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
11. After the startup logo, open the On-Screen Display (OSD) menu. Go to the SYSTEM SETUP: Advanced > Lamp Settings menu. Press MODE/ENTER. The Lamp Settings page displays. Highlight Reset lamp timer. A warning message displays asking if you want to reset the lamp timer. Highlight Reset and press MODE/ENTER. The lamp time will be reset to '0'. Do not reset if the lamp is not new or replaced as this could cause damage. 58 Maintenance
![](/manual_guide/products/benq-hc1200-srgb-dlp-projector-user-manual-47c6a59/58.png)
Maintenance
58
11.
After the startup logo, open the On-Screen Display (OSD) menu. Go to the
SYSTEM SETUP: Advanced > Lamp Settings
menu. Press
MODE/ENTER
.
The
Lamp Settings
page displays. Highlight
Reset lamp timer
. A warning
message displays asking if you want to reset the lamp timer. Highlight
Reset
and
press
MODE/ENTER
. The lamp time will be reset to '0'.
Do not reset if the lamp is not new or replaced as this could cause damage.