BenQ GW2485TC User Manual - Page 35
Charging the connected device via USB-C™ port
View all BenQ GW2485TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
MIC LED indicator Light color Green Amber Off Description The microphone is turned on and ready for use. The microphone is muted. The microphone is not available. Charging the connected device via USB-C™ port The USB-C™ port on your monitor supports power delivery in standby mode yet it is disabled by default. If video source via USB-C™ port is detected, you will be prompted to enable USB-C™ power delivery function in monitor standby mode. Select Yes to proceed. If USB-C Charging 60W from System has been turned to ON, the power delivery will start without further notification. Connecting multiple monitors via MST (Multi-Stream Transport) With connection via the DP-IN and DP-OUT ports, you can output content to one or up to 4 monitors via MST function. DP cable DP cable USB-C™ cable LAN 1. Connect your laptop to the USB-C™ / DP port on the monitor using a USB-C™ / DP cable. Select YES to enable USB-C™ power delivery in monitor standby mode if you are prompted to. The USB-C™ port supplies power to the laptop then even when the monitor is in standby mode. 2. Go to System > MST > ON. Note the OSD menu can be launched and configured only when input signal is detected. 3. Connect the second monitor to the first one using a DP cable as illustrated. 4. Follow Step 3 to connect the third and the fourth monitors if desired. 5. Power on the laptop and the monitors. On all the connected monitors, check the configurations as described in Step 2. How to adjust your monitor 35