BenQ BenQ MW870UST Short-Throw User Manual - Page 40
MODE/ENTER, 3D Color Management, Primary Color, Saturation, MENU/EXIT, Yellow, Green, Cyan, Blue
View all BenQ BenQ MW870UST Short-Throw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
2. Press MODE/ENTER and the 3D Color Management page displays. 3. Highlight Primary Color and press / to select a color from among Red, Yellow, Green, Cyan, Blue, or Magenta. 4. Press to highlight Hue and press / to select its range. Increase in the range will include colors consisted of more proportions of its two adjacent colors. Please refer to the illustration to the right for how the colors relate to each other. For example, if you select Red and set its range at 0, only pure red in the projected RED Yellow GREEN picture will be selected. Increasing its range will include red close to yellow and red close to magenta. 5. Press to highlight Saturation and adjust Magenta Cyan its values to your preference by pressing / . Every adjusent made will reflect to the BLUE image immediately. For example, if you select Red and set its value at 0, only the saturation of pure red will be affected. Saturation is the amount of that color in a video picture. Lower settings produce less saturated colors; a setting of "0" removes that color from the image entirely. If the saturation is too high, that color will be overpowering and unrealistic. 6. Press to highlight Gain and adjust its values to your preference by pressing / . The contrast level of the primary color you select will be affected. Every adjusent made will reflect to the image immediately. 7. Repeat steps 3 to 6 for other color adjusents. 8. Make sure you have made all of the desired adjusents. 9. Press MENU/EXIT to exit and save the settings. 40 Operation