BenQ BenQ MW712 Network Projector User Manual - Page 20
Connecting a monitor, To connect the projector to a monitor
View all BenQ BenQ MW712 Network Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Connecting a monitor If you want to view your presentation close-up on a monitor as well as on the screen, you can connect the MONITOR-OUT signal output jack on the projector to an external monitor following the instructions below: To connect the projector to a monitor: 1. Connect the projector to a computer as described in "Connecting a computer" on page 19. 2. Take a suitable VGA cable (only one supplied) and connect one end of the cable to the D-Sub input jack of the video monitor. Or if your monitor is equipped with a DVI input jack, take a VGA to DVI-A cable and connect the DVI end of the cable to the DVI input jack of the video monitor. 3. Connect the other end of the cable to the MONITOR-OUT jack on the projector. • The output signal for MONITOR-OUT jack only works when the input signal comes from COMPUTER IN-1 or COMPUTER IN-2 jack. When the projector is powered on, the output signal from MONITOR-OUT jack varies depending on the input signal from COMPUTER IN-1 or COMPUTER IN-2 jack. 20 Connection