Beltronics Express Cordless Owner's Manual - Page 7

Features are engaged. (See page 9.) If your unit presents an led illumination pattern other than this standard power-up test sequence, return it to beltronics for servicing. To bypass the power-up test sequence, press the p/v button twice. Your unit will be ready for operation after indicating status of sws™ (led #1) and vg-2 Guard® (led #2). Tutorial Mode The tutorial mode allows you to become more familiar with all audible and visual alerts. To engage this mode, press the  and  buttons simultaneously while the unit is . The audio/ visual alerts will be presented slowly in order of Laser, K, Ka, X, vg-2 Guard® and sws™ followed by the illumination of the "h", "c" and "b" leds. After the tutorial mode, your unit will be on. Memory Retention of Feature Selections Any time your unit is turned  or the batteries are removed, all feature settings are retained in the unit's memory. Memory retention eliminates the need to reset your preferred feature settings each time your unit is turned off and then back . Adjusting the Audio Level Once your Cordless is receiving power, the audio level can be adjusted by continuing to press the ⁄ button down. As you hear the audio level change, the numerals provide a visual reference of the audio level. To reverse the direction in which the audio level cycles, briefly release, then reactivate the ⁄ button. Audio/Visual Alerts for Instant-On/Pulsed Radar This type of signal appears suddenly when a Radar unit is "triggered". The instant-on alert consists of an intense, three second, X, K or Super Wideband Ka audio "burst", coupled with the "ramping" illumination (-) of the 4-led display.  (Dim/Dark) Button The  button allows selection of a dim or dark setting for all leds. To engage dim mode, press the drk button once.  A single "beep" confirms your selection. To completely cancel the illumination of all leds, press drk a second time. You'll