Beko DIN16X10 Owners Manual - Page 33
Cleaning the hose filter
View all Beko DIN16X10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Maintenance and cleaning 4. Clean all three filters under tap water by means of a brush. 5. Place the metal/plastic filter. 6. Place the coarse filter into the micro filter. Make sure that it is properly seated. Turn the coarse filter clockwise until a "click" sound is heard. C Do not use the dishwasher without filter. C Incorrect placement of the filters will reduce washing efficiency. Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose. Check the filter and the hose regularly and clean them if necessary. 1. Turn off the tap and remove the hose. 2. After taking out the filter, clean it under running tap water. 3. Place the cleaned filter back to its seat in the hose. 4. Install the hose to tap. (depends on model) Dishwasher / User's Manual 31/43 EN