Audiovox SUVA2 Installation Guide - Page 2

Warning and Safety Information Caution Because adhesive is used in the installation of the rubber cover/tail, it is recommended that the antenna be installed at or above room temperature (68 degrees). Lower temperatures may cause the adhesive on the rubber cover/tail to not adhere properly to the vehicle roof. Warmer temperatures will also allow for easier over all antenna installation, including easier routing of the antenna cable through the rubber molding around the windows and other areas in the vehicle. Maximum adhesion usually occurs within 72 hours at room temperature, so car washes as well as other contact with the antenna and rubber cover/tail should be avoided during this 72 hour period. Warning Be sure not to cut, damage, or puncture the external jacket of the antenna cable during the installation procedure. Damage to the antenna cable can cause the SIRIUS signal to be degraded or unavailable, and can also cause water to intrude via the cable into the antenna causing the antenna to fail. Do not lengthen or shorten the antenna cable by cutting it. Doing so will cause the antenna to not function properly.  [ Warning and Safety Information ]