Asus PIO-B85M User Guide - Page 59
Chassis Intrude Support [Disabled], Chassis Fan Profile [Standard]
![]() |
View all Asus PIO-B85M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Chassis Fan Profile [Standard] This item appears only when you enable the Chassis Q-Fan Control feature and allows you to set the appropriate performance level of the chassis fan. [Standard] Sets to [Standard] to make the chassis fan automatically adjust depending on the chassis temperature. [Silent] Sets to [Silent] to minimize the fan speed for quiet chassis fan operation. [Turbo] Sets to [Turbo] to achieve maximum chassis fan speed. [Manual] Sets to [Manual] to assign detailed fan speed control parameters. The following four items appear only when you set Chassis Fan Profile to [Manual]. Chassis Fan Upper Temperature [70] Use the and keys to adjust the upper limit of the Chassis temperature. The values range from 20ºC to 75ºC. Chassis Fan Max. Duty Cycle(%) [100] Use the and keys to adjust the maximum chassis fan duty cycle. The values range from 20% to 100%. When the chassis temperature reaches the upper limit, the chassis fan will operate at the maximum duty cycle. Chassis Fan Lower Temperature [20] Displays the lower limit of the chassis temperature. Chassis Fan Min. Duty Cycle(%) [20] Use the and keys to adjust the minimum chassis fan duty cycle. The values range from 20% to 100%. When the chassis temperature is under 40ºC, the chassis fan will operate at the minimum duty cycle. 2.7.6 Chassis Intrude Support [Disabled] This item allows you to enable or disable the chassis intrusion detection function. Connect one end of the chassis intrusion sensor or switch cable to the chassis instrusion connector. The chassis intrusion sensor or switch cable sends high-level signal to the connector when a chassis component is removed or replaced. The signal is then generated as a chassis intrusion event. Configuration options: [Disabled] [Enabled] 2.7.7 Anti Surge Support [Disabled] This item allows you to enable or disable the Anti Surge function. Configuration options: [Disabled] [Enabled] ASUS PIO-B85M 2-29
![](/manual_guide/products/asus-piob85m-user-guide-b1e5c21/59.png)