Asus ESC300 G4 User Guide - Page 31
Hard disk drives (HDD), Installing 3.5-inch HDDs
![]() |
View all Asus ESC300 G4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2.7 Hard disk drives (HDD) The server system supports three (3) 3.5-inch Serial ATA hard disk drives via the hard disk drive bays and one 2.5-inch HDD/SSD drive at the bottom of the HDD cage. Installing 3.5-inch HDDs To install 3.5-inch Serial ATA hard disk drives: 1. Remove the side cover of the chassis. Refer to the Removing the side cover section for more information. 2. Prepare the 3.5-inch HDD and the bundled set of screws. 3. Locate the HDD cage lock, press the it up (A), then swing the HDD cage outwards (B) until it clicks in place. HDD cage lock HDD cage 4. Align and insert the 3.5-inch HDD into the drive bay ensuring that the screw holes on the HDD matches the screw holes on the HDD cage. ASUS ESC300 G4 Screw hole (HDD cage) Screw holes (HDD) 2-13
![](/manual_guide/products/asus-esc300-g4-user-guide-bebd9a2/31.png)