Asko W6022 User manual Use & Care Guide ASKO W6022 EN - Page 30

Installation instructions Built-in installation ASKO washers can be installed beneath a cabinet or worktop with a height of 34½" (876 mm) or in a closet. There must be a gap of about ½" (12 mm) all around the machine, including between the rear edge of the machine's top panel and the back wall. The opening width must be at least 24½" (622 mm). Space must also be available for the inlet and drain hoses. See the illustration below for measurements and positions. If the washer is installed in a closet the door shall be opend while the washer is running. Program plate in multiple languages Certain machines include double-sided program plates in different languages (see the detergent compartment and the bag with the user handbook that comes with the machine). You can replace or reverse the card to show the language most appropriate for you. To remove the card from its holder in the detergent compartment, press the card with your thumb and push it sideways (see illustration). If the drain outlet is higher than 24"(610 mm), the connections will need to be recessed. The card will then bend slightly and you can easily remove it. To fit the card, bend it slightly in order to easily insert it into the holder in the detergent compartment. 30 Customer Care Center 1-800-898-1879 www.askousa.com