Ariens Classic LM 21 Owners Manual - Page 21

Engine/blade Control, Adjustment, No Slack

Get Ariens Classic LM 21 PDF manuals and user guides View all Ariens Classic LM 21 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

ENGINE/BLADE CONTROL ADJUSTMENT (911192, 193, 194) To adjust engine/blade control: 1. Loosen cable nuts away from bracket. OM1010 2. Squeeze z-bend bracket at engine end of cable toward front of unit and hold in place. 4. Tighten lower cable nut to 3 mm below bracket. Release z-bend bracket. OM1020 5. Tighten upper cable nut until bracket is secure between cable nuts. OM1030 6. Engage engine/blade control. Measure distance between middle of z-bend and cable bracket. Measurement should be as shown below. Kawasaki Engines: 1.125 - 1.375" (2.8 - 3.5 cm) OM1040 3. Pull cable down from bracket until there is no slack in cable. OM1051 7. If correct measurement cannot be set, contact your local dealer. No slack OM1061 GB - 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
GB - 21
ENGINE/BLADE CONTROL
ADJUSTMENT
(911192, 193, 194)
To adjust engine/blade control:
1. Loosen cable nuts away from bracket.
2. Squeeze z-bend bracket at engine end
of cable toward front of unit and hold in
place.
3. Pull cable down from bracket until there
is no slack in cable.
4. Tighten lower
cable nut to
3 mm below
bracket.
Release z-bend
bracket.
5. Tighten upper
cable nut until
bracket is secure
between cable
nuts.
6. Engage engine/blade control. Measure
distance between middle of z-bend and
cable bracket. Measurement should be
as shown below.
7. If correct measurement cannot be set,
contact your local dealer.
OM1010
OM1040
No slack
OM1061
OM1020
OM1030
OM1051
Kawasaki Engines: 1.125 – 1.375"
(2.8 – 3.5 cm)