Adaptec 39160 User Reference - Page 31
Connecting SCSI Devices, all devices will operate at their maximum speed. - ultra160
UPC - 760884155240
View all Adaptec 39160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Connecting SCSI Devices Connecting SCSI Devices Here are some examples of how you can connect internal and external SCSI devices to the Adaptec SCSI Card 39160. To achieve maximum performance, attach the first device to the end connector of the cable (furthest from the SCSI card); attach other devices to the connectors that are closer to the SCSI card. The first example shows Ultra160 and Ultra2 SCSI devices connected to internal and external SCSI connectors of both SCSI channels. Note the built-in terminators at the end of the internal LVD SCSI cables. The last external SCSI device on each SCSI channel must be terminated with an LVD/SE terminator plug to ensure that all devices will operate at their maximum speed. Built-in terminator T Built-in terminator T T T Terminated devices Caution: Do not connect SCSI devices to more than two of the three SCSI Channel A connectors at the same time. The following example shows Ultra160 and Ultra2 SCSI devices connected to the internal connectors of both SCSI channels. Built-in terminator T Built-in terminator T 25