Adaptec 2940U2W User Guide - Page 11

NOTE When using the internal-to-external Ultra SCSI cable, the 50-pin external connector itself, or the last external peripheral connected to the connector, must have a SCSI terminator installed. Terminate Here Terminate Here WRONG! Not Terminated Here STEP 1 68-pin External Ultra2 SCSI Connector Use the 68-pin external Ultra2 SCSI connector to connect your external Ultra2 peripherals. Ultra2 external cables are not included in the kit. For each external Ultra2 peripheral, you will need to obtain a 68pin external Ultra2 SCSI cable. Follow these steps to connect your external Ultra2 SCSI peripherals: NOTE We recommend keeping your Ultra2 peripherals separate from your non-Ultra2 peripherals. Connecting a non-Ultra2 peripheral to the Ultra2 SCSI connector forces the Ultra2 SCSI segment and any attached peripherals to drop down to Ultra SCSI performance levels (40 MBytes/sec). (See "Bus Segments on the SCSI Card 2940U2W" on page 2.) Connect one end of the external SCSI cable to the external Ultra2 connector on the SCSI Card 2940U2W. High-density 68-pin External Ultra2 SCSI Cable (Not Included in Kit) 68-pin External Ultra2 SCSI Connector 11 Downloaded from www.Manualslib.com manuals search engine