Adaptec 2940U2W User Guide
Adaptec 2940U2W - Storage Controller U2W SCSI 80 MBps Manual
 |
UPC - 741199022427
View all Adaptec 2940U2W manuals
Add to My Manuals
Save this manual to your list of manuals |
Adaptec 2940U2W manual content summary:
- Adaptec 2940U2W | User Guide - Page 1
drives, to any IBM-compatible computer with PCI expansion slots. This installation guide provides instructions for: • Installing the SCSI Card 2940U2W • Connecting SCSI peripherals • Installing SCSI Card 2940U2W software See the SCSI Card 2940U2W User's Reference for additional information on using - Adaptec 2940U2W | User Guide - Page 2
Adaptec SpeedFlex™ technology. SpeedFlex technology ensures that you get the most performance from your Ultra2 SCSI peripherals by electronically isolating the Ultra2 SCSI segment from the Ultra SCSI segment on the SCSI bus. With the SpeedFlex advantage, the SCSI Card 2940U2W can support Ultra2 SCSI - Adaptec 2940U2W | User Guide - Page 3
your computer manual to locate the PCI slots. If your computer is a tower model, lay it on its side to allow for easier installation of the SCSI Card 2940U2W. Slot Cover Screw Expansion Slot Cover PCI Expansion Slots (Typically White or Ivory) 3 Downloaded from www.Manualslib.com manuals search - Adaptec 2940U2W | User Guide - Page 4
the SCSI Card 2940U2W into the PCI expansion slot; press down firmly until it clicks into place, then replace the slot cover screw. SCSI Card 2940U2W Installed in a PCI Expansion Slot SETTING UP SCSI PERIPHERALS Setting up SCSI peripherals before attaching them to the SCSI Card 2940U2W typically - Adaptec 2940U2W | User Guide - Page 5
Terminator Plug the long end of the cable to the Ultra2 connector on the SCSI Card 2940U2W (connectors are labeled "Ultra2-LVD/SE"). Connectors Labeled "Ultra2-LVD/SE" 68-pin Internal Ultra2 SCSI Connector 68-pin Internal Ultra2 SCSI Cable 5 Downloaded from www.Manualslib.com manuals search engine - Adaptec 2940U2W | User Guide - Page 6
internal Fast/Wide Ultra peripherals. Locate the 68-pin internal Ultra SCSI cable in the package. Connect to Fast/Wide Ultra Peripheral (Terminated) Connect to SCSI Card 2940U2W Connect to Fast/Wide Ultra Peripheral (Not Terminated) 6 Downloaded from www.Manualslib.com manuals search engine - Adaptec 2940U2W | User Guide - Page 7
: Locate the 50-pin internal Ultra SCSI cable in the package. Connect to SCSI Card 2940U2W Connect to Fast/Ultra Narrow Peripheral (Terminated) Connect to Fast/Ultra Narrow Peripheral (Not terminated) (Continued on the other side) 7 Downloaded from www.Manualslib.com manuals search engine - Adaptec 2940U2W | User Guide - Page 8
the 50-pin internal-to-high-density 50-pin external Ultra SCSI cable in the package. Connect to SCSI Card 2940U2W Secure to Card Slot Opening in Computer Chassis Connect to Fast/Ultra Narrow Internal Peripherals (Not terminated) 8 Downloaded from www.Manualslib.com manuals search engine - Adaptec 2940U2W | User Guide - Page 9
mounting bracket of the cable to the exposed card slot opening in the chassis of the computer. Use these connectors on the cable to connect up to two internal Fast/Ultra Narrow SCSI peripherals, These peripherals must not be terminated. 9 Downloaded from www.Manualslib.com manuals search engine - Adaptec 2940U2W | User Guide - Page 10
to the previous one until all peripherals are connected. The peripheral at the end of the chain must be the only external peripheral terminated. Terminated SCSI Peripheral STEP 8 Connect all power cables to the external peripherals. 10 Downloaded from www.Manualslib.com manuals search engine - Adaptec 2940U2W | User Guide - Page 11
the SCSI Card 2940U2W" on page 2.) Connect one end of the external SCSI cable to the external Ultra2 connector on the SCSI Card 2940U2W. High-density 68-pin External Ultra2 SCSI Cable (Not Included in Kit) 68-pin External Ultra2 SCSI Connector 11 Downloaded from www.Manualslib.com manuals search - Adaptec 2940U2W | User Guide - Page 12
To install the SCSI Card 2940U2W software (software driver), go to the section below for the operating system (for example, Windows® 95) installed on your computer. If the operating system is not yet installed, install it now. Refer to your operating system documentation for instructions. NOTE If - Adaptec 2940U2W | User Guide - Page 13
the SCSI Card 2940U2W installed in your computer and will ask you to select which driver you want to install. Select "Driver from disk provided by hardware manufacturer," then click OK. Insert the Adaptec EZ-SCSI Setup Diskette in your floppy disk drive, then click OK. Follow the instructions that - Adaptec 2940U2W | User Guide - Page 14
A DA P T E C INSTALLATION GUIDE SCSI CARD 2940U2W Downloaded from www.Manualslib.com manuals search engine
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
 |
 |
1
I
NTRODUCTION
With SCSI Card 2940U2W, you can connect up to 15 SCSI peripherals,
such as hard disk drives, scanners, CD-ROM drives, tape drives, to any
IBM-compatible computer with PCI expansion slots.
This installation guide provides instructions for:
•
Installing the SCSI Card 2940U2W
•
Connecting SCSI peripherals
•
Installing SCSI Card 2940U2W software
See the
SCSI Card 2940U2W User’s Reference
for additional informa-
tion on using the SCSI Card 2940U2W.
Check the Kit Contents
Your SCSI Card 2940U2W kit should contain the following items:
SCSI Card 2940U2W
High-density 68-pin Internal Ultra SCSI Cable
Standard 50-pin Internal Ultra SCSI Cable
High-density 68-pin Internal Ultra2 SCSI Cable
Standard 50-pin Internal-to-High-density
50-pin External Ultra SCSI Cable (With
Two Internal Connectors)
Manuals
Disks and
CD-ROM
Downloaded from
www.Manualslib.com
manuals search engine