Acer XB253QGW User Manual - Page 30
Note: DDC/CI, short for Display Data Channel/Command Interface
![]() |
View all Acer XB253QGW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
10. DDC/CI: Allows the monitor settings to be set through the software on the PC. Note: DDC/CI, short for Display Data Channel/Command Interface, which allows monitor controls to be sent via software. 11. HDMI Black Level: You can select the level of blackness under HDMI source. The options are Normal and Low. 12. Quick Start Mode: Enable monitor rapidly. 13. Over Clock: Turn this function On to support refresh rate at 280 Hz. The default is Off. Note: When Over Clock is On, Adaptive-Sync is automatically turned off. 14. Power-off USB charge (Optional): Turn On or Off. Product information 1. From any function page, press the key to open the OSD. 2. Reset All Settings: Reset all settings to the factory defaults. EN-20
![](/manual_guide/products/acer-computers-xb253qgw-user-manual-e8e8da9/30.png)
EN-20
10.
DDC/CI: Allows the monitor settings to be set through the software on
the PC.
11.
HDMI Black Level: You can select the level of blackness under HDMI
source. The options are Normal and Low.
12.
Quick Start Mode: Enable monitor rapidly.
13.
Over Clock: Turn this function On to support refresh rate at 280 Hz. The
default is Off.
14.
Power-off USB charge (Optional): Turn On or Off.
Product information
1.
From any function page, press the
key to open the OSD.
2.
Reset All Settings: Reset all settings to the factory defaults.
Note: DDC/CI, short for Display Data Channel/Command Interface,
which allows monitor controls to be sent via software.
Note: When Over Clock is On, Adaptive-Sync is automatically turned
off.