Acer U5230 User Manual - Page 62

Subnet Mask: 255.255.255.255, IP Address: 10.10.10.10

Page 62 highlights

User Controls 6. Type in the IP address and Subnet mask, then press "OK". 7. Press the "Menu" button on the projector. 8. Use keys to select SETUP > Network > LAN Settings. 9. After getting into LAN Settings, input the following connection parameters: `` DHCP: Off `` IP Address: 10.10.10.10 `` Subnet Mask: 255.255.255.255 `` Gateway: 0.0.0.0 `` DNS: 0.0.0.0 10. Press "Enter" to confirm settings. 11. Open a web browser, for example Microsoft Internet Explorer. with Adobe Flash Player 9.0 or higher installed. 12. In the Address bar, input the projector's IP address: 10.10.10.10. English 54

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94

54
English
User Controls
6. Type in the IP address and Subnet mask, then press “OK”.
7. Press the “Menu” button on the projector.
8. Use
keys to select SETUP > Network > LAN Settings.
9. After getting into LAN Settings, input the following connection
parameters:
`
DHCP: Off
`
IP Address: 10.10.10.10
`
Subnet Mask: 255.255.255.255
`
Gateway: 0.0.0.0
`
DNS: 0.0.0.0
10.
Press “Enter” to confirm settings.
11. Open a web browser, for example Microsoft Internet Explorer.
with Adobe Flash Player 9.0 or higher installed.
12. In the Address bar, input the projector’s IP address:
10.10.10.10.