Acer SL1220n User Manual - Page 53
Info menu, Specification for RS232 by TELNET
View all Acer SL1220n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
USING THE PROJECTOR Specification for "RS232 by TELNET": 1. Telnet: TCP. 2. Telnet port: 23 (for more detail, kindly please get contact with the service agent or team). 3. Telnet utility: Windows "TELNET.exe" (console mode). 4. Disconnection for RS232-by-Telnet control normally: Close 5. Windows Telnet utility directly after TELNET connection ready. ±± Limitation 1 for Telnet-Control: there is less than 50 bytes for successive network payload for Telnet-Control application. ±± Limitation 2 for Telnet-Control: there is less than 26 bytes for one complete RS232 command for Telnet-Control. ±± Limitation 3 for Telnet-Control: Minimum delay for next RS232 command must be more than 200 (ms). Info menu Note: Functions vary depending on model definition. Info menu View the projector information as listed below: Serial Number Source Resolution Refresh Rate Display Mode Power Mode (Standby) Light Source Hours Network Status IP Address Brightness Mode FW Version English 53