Acer PREDATOR X45 User Manual - Page 16

Connecting the cables To install the monitor on your host system, please follow the steps below: 1. Turn off your computer and unplug your computer's power cord. 2. Connect the signal cable to the DP (optional) and/or HDMI (optional) input socket of the monitor, and the DP (optional) and/or HDMI (optional) output socket of the graphics card on the computer. 3. Connect the USB Cable (Optional) Connect the USB 3.2 cable to port. 4. Connect the Type C Cable (Optional) Connect the Type C Cable to port for fast charge. 5. Insert the monitor power cable into the power port at the back of the monitor. 6. Plug the power cords of your computer and your monitor into a nearby electrical outlet. 7. Connecting HDMI/DP+USB-B to computer 1 and USB-C to computer 2 when Control up to 2 computers from a single set of keyboard and mouse connected to the monitor. USB Type C USB USB Type A DP 5V/1.0A 5V/1.0A 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/4.5A Note: • Audio output is only for audio output model. Please check user manual for more instruction. • Charging USB devices just in DC on mode. 5 X45 User Guide English