Acer PL6310W User Manual - Page 33
Display 3D menu, Brightness Mode, DynamicBlack, Power, Reset, 3D Mode, DLP-Link, 3D → 2D, R Right
View all Acer PL6310W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
USING THE PROJECTOR Brightness Mode Adjust the brightness mode settings. DynamicBlack: Use to automatically adjust the picture brightness in order to give optimum contrast performance. Reset Power: Choose the power percentage for brightness mode. Return the factory default settings for color settings. Display 3D menu Note 3D Mode This projector is a 3D ready projector with DLP-Link 3D solution. Please make sure your 3D glasses are use for DLP-Link 3D before enjoy your video. This projector supports frame sequential (page-flip) 3D via HDMI/VGA ports. To enable 3D mode, the input frame rate should be set to 60Hz only, lower or higher frame rate is not supported. To reach the best performance, resolution 1920x1080 is recommended, please be noted that 4K (3840x2160) resolution is not supported in 3D mode. Use this option to disable the 3D function or select the appropriate the 3D function. Off: Select "Off" to turn off 3D mode. DLP-Link: Select to use optimized settings for DLP 3D Glasses. Note: If the 2D and 3D sources enter PJ at the same time, if the ghosting image appears in the 2D source, make sure to manually turn off the 3D function. 3D → 2D Use this option to specify how the 3D content should appear on the screen. 3D: Display 3D signal. L (Left): Display the left frame of 3D content. R (Right): Display the right frame of 3D content. 3D Format Use this option to select the appropriate 3D format content. Auto: When a 3D identification signal is detected, the 3D format is selected automatically. SBS: Display 3D signal in "Side-by-Side" format. Top and Bottom: Display 3D signal in "Top and Bottom" format. Frame Sequential: Display 3D signal in "Frame Sequential" format. 3D Sync Invert Use this option to enable/disable the 3D sync invert function. English 33