Acer Altos S700F User Manual - Page 90
Installing and Removing a Disk Drive Carrier
![]() |
View all Acer Altos S700F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
74 Chapter 6 Installing and Removing Components Installing and Removing a Disk Drive Carrier The disk drive carriers are located in the front of the enclosure. Follow these procedures to install and remove the disk drive carrier. Installing a Disk Drive Carrier 1 Select the disk drive slot into which the disk drive carrier is to be installed and remove the carrier blank if there is one installed. 2 Orient the disk drive carrier such that the LEDs are on the top (on the right for desk side systems). 3 With the cam lever fully open slide the carrier into the slot until the lever starts to close. 4 Fully close the cam lever. The lever is fully closed, and the drive locked in place, when the lever "clicks" into position. Removing a Disk Drive Carrier 1 Using your finger, release the locking tab by pressing it in the direction shown in Figure 5-1, and pull the cam lever towards you. 2 Fully open the cam lever. (approx. 90o to enclosure). 3 With the cam lever open wait for at least one minute to allow the disk drive to spin down fully before removing it. 4 Gently, pull the disk drive carrier out of the enclosure. Caution: Immediately replace the disk drive carrier or install a disk drive carrier blank to maintain correct airflow.
![](/manual_guide/products/acer-computers-altos-s700-user-manual-3221337/90.png)